Cellphone repair technicians are exposed to health hazards due to lead solder wires – EcoWaste Coalition

Image by martinandrose.com

AN ENVIRONMENT and public health watchdog called on the Philippine government inculcate health consciousness among cellular phone repair technicians after noting their use of lead as a soldering material.

In a recent statement, the EcoWaste Coalition pressed the Department of Labor and Employment through the Occupational Safety and Health Center to conduct training programs in collaboration with shopping mall management that will train cell phone repair technicians on safe soldering work practices.

The move, the EcoWaste Coalition explained, would be in line with President Rodrigo Duterte’s recently signed Republic Act 11058 (the Occupational Safety and Health Standards Act).

The group said the use of lead solder wire by cellphone repair shops produces toxic fumes that could be inhaled by the technicians, their customers and passersby. It added that the inhalation of lead solder fumes and the ingestion of lead from a contaminated surface are potential exposure routes,

“While we do appreciate their role in reducing e-waste by prolonging the life of e-gadgets, we are concerned that lead solder fumes are exposing repair technicians to hazardous emissions that can harm their health and those of others, including customers who are often seen watching, sometimes in the company of young children, while their phones are being fixed,” said EcoWaste Coalition E-Waste Campaigner Primo Morillo.

“It’s very important that air pollution from soldering activities, especially in an enclosed space, is appropriately addressed,” added Morillo.

“We wish the authorities can assist in training repair technicians to be more health conscious and to take safety precautions to heart.

Based on information gathered from cell phone repair technicians, the group obtained six samples of soldering alloys from electronic supplies stores that are commonly used in cell phone repair.

All six samples of solder wire had lead in the range of 4.62 to 67.15 percent as per X-Ray Fluorescence (XRF) chemical analysis. None of the samples provided safety information about the usage of lead-based solder.

According to the US Centers for Disease Control and Prevention (CDC), “a person who is exposed to lead over time may feel abdominal pain, constipated, depressed, distracted, forgetful, irritable, and nauseous or sick.”

The US CDC warned that “people with prolonged exposure to lead may also be at risk for high blood pressure, heart disease, kidney disease, and reduced fertility.”

To prevent and reduce occupational lead exposure, especially for technicians engaged in the repair of cell phones and other e-gadgets, the EcoWaste Coalition, quoting the recommendations made in the published work “Lead Soldering Safety Guidelines,” suggests the following:

“Avoid skin burns and never touch the tip/element of a soldering iron.”

“Avoid inhalation of lead soldering fumes. Work in a well ventilated area or use local exhaust ventilation.”

“Avoid ingestion of lead due to surface contamination by keeping soldering areas clean and properly managing lead soldering waste.”

“Personnel should not eat or drink in soldering areas and should wash hands after completing soldering work.”

“Use lead free (preferable) or low lead solder whenever possible.”

“Use necessary personal protective equipment.”

 

BD Admin: You think your friends gonna like this piece? If you do, kindly share it. Thanks.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.